About Nanpao
Their major successful products from R&D in the past were PU, Water-Based PVAC, EVA, Polyacrylates, Powder Coating, Liquid Paint, Neoprene Adhesive, Grafted CR Adhesive, EPOXY Resins, Phenolics,and Shoe Material, Shoe Primers.
The products for shoe industry are also comprehensive and innovative for the development of shoe materials. Being a leader in Resins Industry, we invest a huge amount of resources into the research and development of Adhesives, Primers, Paints, Cleaners, Shoe Stiffeners and Hot-Melt Adhesives & etc. For upgrading our products we also proactively transform our products into Water-Based in nature to catch-up with the ever-changing requirements of shoe materials. We are proudly to achieve the recognition by the world-wide leading shoe-makers for being their long-term partners.
Products
One of the top three shoe-adhesives supplier in the world?
Adhesive
Cleaner
Primer
Hardner
Vulcanised Footwear Adhesive
Hot Melt Adhesive
Adhesive
| Name | S / N | Drying/Curing Condition | Main Applications | Download |
| General Use Adhesive | 739NN | 55-60? x 5-6 mins | General Application | |
| General Use Adhesive (Toluene) | 739N | 55-60? x 5-6 mins | General Applicaion | |
| Adhesive for wrapping | 768N | 55-60? x 5-6 mins | Wrapping, Lasting | |
| General Use Adhesive (Toluene) | 743 | 50-60? x 4-6 mins | General application for shoe-making industry | |
| General Use Adhesive (Toluene) | 793 | 55-60 x 3-4 mins | General application for shoe-making industry | |
| Adhesive for Lamination | AD-30N | Roll Temp x 80-90? | Lamination (mash and EVA foam) | |
| General Use Adhesive | NP-71KMN | 50-60? x 3.5-4 mins | General application for shoe-making industry | |
| General Use Adhesive | NP-89KMN | 55-60? x 5-6 mins | General application for shoe-making industry | |
| General Use Adhesive (Toluene) | NP-71 | 55-60? x 5-6 mins | General application for shoe-making industry | |
| General Use Adhesive (Toluene) | NP-72 | 55-60? x 5-6 mins | General application for shoe-making industry |
Cleaner
| Name | S / N | Drying/Curing Condition | Main Applications | Download |
| Cleaner for Phylon | D-11 | 50-55? x 2-3min | Mainly for the cleaning of EVA/Phylon surface and uncured rubber. Before priming, it has fast cleaning effect for release oil, paint & dirt, it is able to increase the wetting ability of primer and to improve the priming performance & bonding effect. | |
| Cleaner for Upper and Finishing | 256 | Room temp. x 2-5min or 40-45? x 2-3min | It is designed for cleaning dirt from synthetic leather, PU Foam, PU leather, leather, mid-sole, outsole, etc. Fast cleaning, easy to use, increase luster of material surface. | |
| Cleaner for Phylon (Toluene) | 253 | Room temp. x 2-5min or 40-45? x 2-3min | For cleaning dirt off synthetic leather, PU Foam, PU leather, leather, mid-sole, outsole, etc. Fast cleaning, easy to use, increase luster of material surface. | |
| MEK | 29 | Room temp. x 2-5min |
Primer
| Name | S / N | Drying/Curing Condition | Main Applications | Download |
| Primer for Rubber and TPR | 1015FS | Room temp.x 10-15 mins or 50-60? x 3-4 mins | It is widely applied for RB &TPR chlorinating to increase the polarity. | |
| Primer for Natural Rubber | NP-11N | Room temp. x 1-2 mins | Natural Rubber | |
| Primer for EVA (Toluene) | 1019K / 150 | 50-55? x 2.5-3.5 mins | Good bonding strength after priming and used with PVC, Leather, RB, etc. | |
| Primer for EVA, CMP & IP | NUV-24N | 50-55? x 2.5-4 mins | 8650 is a non-UV primer for EVA with higher degree of hardness, suitable CMP & IP substrate for mid-sole. Used with S/B PU and W/B PU adhesives. | |
| Primer for EVA and Phylon | UV-22 | 50-55? x 2.5-3 mins | EVA and Phylon | |
| Primer for EVA and Phylon | UV-31 | 50-55? x 2-3 mins | EVA and Phylon | |
| Primer for Leather | 111GN | 50-60? x 3-4 mins | 111GN is leather/synthetic leather cement booster which consists of PU resin. It has good penetration and adhesion to leather & various materials. 111GN has excellent priming effect on roughed leather and split leather,TPU,syn leather. | |
| Primer for PVC (Toluene) | 111M | 50-55? x 2.5-3.5 mins | PVC, PVC counter | |
| Primer for PU and PVC | 111YCN | 50-55? x 2-3 mins | PU, PVC, Synthetic Leather, Mesh | |
| Primer for All Leathers | 210 | 50-55? x 2.5-3.5 mins | Leather, Synthetic Leather, Oil Leather |
Hardner
| Name | S / N | Drying/Curing Condition | Main Applications | Download |
| Hardener for S/B PU | RFE | Room temp. | DESMODUR RFE is “Aromatic Polyisocyanate” compound. It has higher performance of cross-linking and vulcanization. It is widely used for curing of natural rubber, synthetic tuber or other adhesives, improve property of bonding strength, heat and water resistance etc. | |
| Hardener for S/B PU | 1048S | Room temp. | 1048RC is an “Aliphatic Polyisocyanate” hardener. It has non-yellowing property to UV light or sun exposure. Add into PU adhesives will improve adhesion quality. | |
| Hardener for S/B PU | T-HA201 / T-A201S | Room temp. | Hardener for solvent based PU cement / primer | |
| Hardener for S/B PU | THA-400 | Room temp. | Hardener for solvent based PU cement / primer | |
| Hardener for W/B PU | CL-160 | Room temp. | For Water Based PU cement / primer | |
| Hardener for W/B PU | CL-10AN | Room temp. | For Water Based PU cement / primer | |
| Hardener for W/B PU | CL-50 | Room temp. | For Water Based PU cement / primer | |
| Hardener for W/B PU | CL-001 | Room temp. | For Water Based PU cement / primer |
Vulcanised Footwear Adhesive
| Name | S / N | Drying/Curing Condition | Main Applications | Download |
| Adhesive for Assembly | 793 | Drying at room temperature or 55~65?× 4~6min | It can be applied for many materials, such as PU leather, sponge, cloth and TPR etc. |
Hot Melt Adhesive